Skip to content

Swing in the Center Quilt Block Free Tutorial

    Today let’s look at this lovely Swing in the Center quilt block. Well, Swing in the Center is one of the names it goes by – there’s also Dumbbell Block, Mrs. Roosevelt’s Favorite, and Roman Pavement! No matter the name, it is a pretty block. Here I’ve made it with three colors and a light background. Let’s get started!

    swing in the center quilt block

    Fabric Requirements for a 12″ Finished Swing in the Center Quilt Block

    • Light/Ivory: 24 – 2.5″ squares, and 4 – 2.5″ x 4.5″ rectangles
    • Dark 1/Green: 4 – 2.5″ x 4.5″ rectangles
    • Dark 2/Blue: 5 – 4.5″ squares
    • Dark 3/Red: 8 – 2.5″ squares

    swing in the center fabric requirements

    Sewing Directions:

    Center Unit:

    Step 1:

    Using one of the Dark 2/Blue 4.5″ squares and four Light/Ivory 2.5″ squares, make a Square in a Square block for the Center unit. You can find a tutorial for a basic Square in a Square block at https://quiltembroiderypdf.com/how-to-sew-a-basic-square-in-a-square-block

    square in a square block

    Corner Units:

    Step 2:

    The Corner units are basically the same as the Center unit except that one corner isn’t snowballed. Using the remaining Dark 2/Blue 4.5″ squares, and 12 Light/Ivory 2.5″ squares, sew together four Corner units.

    swing in the center 2 

    Flying Geese Units:

    Step 3:

    Using the four Dark 1/Green 2.5″ x 4.5″ rectangles, and eight Light/Ivory 2.5″ squares, make four Flying Geese units as shown in the picture below. You will find my tutorial for sewing a Flying Geese block at https://quiltembroiderypdf.com/how-to-sew-a-basic-flying-geese-block

    swing in the center 3

    Step 4:

    Now you can repeat Step 3 using the four Light/Ivory 2.5″ x 4.5″ rectangles, and the eight Dark 3/Red 2.5″ squares as shown in the picture below.

    swing in the center 4

    Step 5:

    Pair up a Step 3 unit and a Step 4 unit as shown below.

    swing in the center 5

    Step 6:

    Sew the two units together and press the seam allowance toward the Dark 1/Green fabric as shown in the picture below. Repeat Steps 5 and 6 for a total of four Flying Geese units.

    swing in the center 6

    Putting It All Together:

    Step 7:

    Lay out the Center unit, the Corner units, and the Flying Geese units in a typical Nine Patch configuration as shown below.

    swing in the center 7

    Step 8:

    Now you just sew the units together in three rows…

    swing in the center 8

    Step 9:

    And press the seam allowances. In the picture below you can see that I pressed the seam allowances away from the Flying Geese units. Hindsight being 20/20, I probably should have pressed the other way but either way works.

    swing in the center 9

    Step 10:

    All that’s left is to sew the three rows together, and

    swing in the center 10

    Step 11:

    Press the seam allowances toward the outside of the Swing in the Center quilt block as shown in the picture below. You’re done!

    swing in the center 11